1 working + 1 standby starters

Swayam Three Phase Digital 1 Working 1 Standby Star-Delta Starter with GSM Mobile (WLC)

A three phase star-delta digital starter for a 1 working + 1 standby motor set-up, with a GSM mobile starter and a water level controller (WLC). It lets you control the motor by phone call and SMS from anywhere, starts the motor when the water tank is empty and stops it when the tank is full and stops the motor and alerts you by call and SMS on a phase fault. Developed in-house by Flux Electronica, Pune.

Swayam Three Phase Digital 1 Working 1 Standby Star-Delta Starter with GSM Mobile (WLC)

Key facts

BrandSwayam
Type1 working + 1 standby digital starter
SupplyThree phase
StarterDigital star-delta
Mobile controlCalls and SMS over GSM
Water level controlYes (WLC): starts on empty tank, stops on full tank
Motors1 working + 1 standby
Battery backup24 hours
Current sensing3 CT coils
DisplayDigital: voltage, current, SIM card range, faults
DatasheetNot available yet
Warranty1 year from delivery (terms)
Made byFlux Electronica India Pvt. Ltd., Pune

Features

Precautions

  1. Turn off the main power supply for the starter.
  2. Mobile Auto works with SIM cards from Jio, Airtel, BSNL, Idea and Vodafone (Vi). Check which SIM card has the best range and insert that SIM card. Also, activate the SIM card as per the company’s guidelines, and remember to recharge it every month.
  3. Ensure that the Mobile Auto is configured to receive SMS and calls for any motor faults. It is crucial to maintain sufficient balance in the SIM card.
  4. If the Mobile Auto has weak network coverage, use a 3-phase line wire as an antenna. Keep the sides apart and position the antenna at a higher elevation.

Connection procedure

  1. Connect the red wire labeled L1, the yellow wire labeled L2, and the blue wire labeled L3 of the main supply.
  2. Connect the first three wires, red wire labeled M1, yellow wire labeled M2, and blue wire labeled M3, to the appropriate points of the motor. Then, connect the remaining three wires, red wire labeled M4, yellow wire labeled M5, and blue wire labeled M6, to the other points on the motor. Double-check all connections for safety before powering on.

Safety: switch off the main supply before any wiring. If you are not sure, ask a qualified electrician or call us.

Datasheet

There is no datasheet for this model yet. Ask us for details.

All datasheets

Other versions

Good to know

Ask about this product

Call, WhatsApp or email us, or use the form below.